Hangzhou 6460

Hangzhou Watch Company · Automatic · Mid tier · Family: Hangzhou 6300

Factory specs

Caliber
6460
Made in
China
Frequency
28,800 bph (4 Hz)
Power reserve
40 h
Jewels
25
Hacking
Yes
Hand winding
Yes
Accuracy
—
Diameter
—
Height
5.65 mm
Functions
Hours, Minutes, Seconds, Date, GMT

Chinese automatic GMT caliber (also written HZ6460; a 6460B version exists) with central hours, minutes, seconds and 24-hour GMT hand and a date at 3. No factory spec sheet from Hangzhou was found. Caliber Corner gives 11½ lignes (26mm), 5.65mm high, 25 jewels, 28,800 vph, about 40 hours, hacking, hand winding, quickset date and a bidirectionally winding rotor, and describes it as an ETA 2824-2 type built on Hangzhou's 6300 base with an added "office/caller" GMT (local hour hand fixed, GMT hand set independently); Watchdives' own movement guide confirms only automatic GMT at 28,800 vph and cites San Martin's SN0054G-F listing for 25 jewels, 40 hours and stop-seconds, and says the setting architecture isn't established. Diameter is left blank (26mm rounded vs 25.6mm for 11½ lignes) and accuracy is not published. Not a copy of the ETA 2893 GMT, so `clone_of` is left empty. Tier "mid", alongside other Chinese 2824-type calibers such as the PT5000.

Watches with the Hangzhou 6460

WatchPrice fromMovementDia. mmThick mmCrystalMicro-adjust
Watchdives WD1993 $179 Hangzhou 6460 40.5 11.8 Sapphire Tool (pin holes)
Watchdives WD16570B $189 Hangzhou 6460 38 11.8 Sapphire —
San Martin SN054 39mm (Hangzhou 6460) $299 Hangzhou 6460 40 13 Sapphire Tool (pin holes)
San Martin SN075 43mm (Hangzhou 6460) $349 Hangzhou 6460 43 11.7 Sapphire no bracelet
San Martin SN016 40.5mm $355 Hangzhou 6460 40.5 13 Sapphire —
San Martin SN0005 40mm (Hangzhou 6460) $368 Hangzhou 6460 40 13 Sapphire —
San Martin SN026 39.5mm (Hangzhou 6460) $368 Hangzhou 6460 39.5 11.5 Sapphire —
San Martin SN015 40.5mm $379 Hangzhou 6460 40.5 13.5 Sapphire —
San Martin SN0005 40.5mm (Hangzhou 6460) $399 Hangzhou 6460 40.5 13.5 Sapphire —

Sources